# Roofing Calculator

Free roofing calculator for shingle roofs. Enter your house footprint and pitch, or the roof area, to get roofing squares and how many bundles to buy.

Calculator page: <https://www.howmanyyardsdoineed.com/roofing-calculator/> (updated 2026-10-06). This Markdown version shows the default example; enter your own dimensions on the page.

**Answer:** A 40 × 30 ft house with 1 ft overhangs and a 6/12 pitch has about 1,503 sq ft of roof (15.03 roofing squares); with 10% extra that is 16.53 squares, so buy 51 bundles of shingles at 32.8 sq ft per bundle.

## How to use this roofing calculator

1. Enter the house **length** and **width** measured at the walls. Meters and, if you already know it, **Roof area** are under **More options**.
2. Enter the **pitch** as rise per 12 of run. If you don't know it, measure it with the [roof pitch calculator](https://www.howmanyyardsdoineed.com/roof-pitch-calculator/).
3. Under **More options**, check the **overhang** that extends past each wall at the eaves and rakes, and enter the **coverage per bundle** printed on the shingle wrapper, or tap one of the published product figures.
4. There too, set a waste allowance for cuts at hips, valleys, and rakes, and optionally your underlayment roll coverage.

## How to calculate roofing squares: the formula, shown

Roofing is ordered by the **square**, which is 100 square feet of roof area. A roof is larger than the footprint it covers because it slopes. For roof planes that all share one pitch, the sloped area is the plan area (including overhangs) times the slope factor √(1 + (pitch ÷ 12)²). That holds for a simple gable roof and for a hip roof whose planes share the same pitch.

**Default example.** A 40 × 30 ft footprint with 1 ft of overhang on every side, a 6/12 pitch, a 10% allowance, and 32.8 sq ft per bundle. That coverage is the figure Owens Corning publishes for TruDefinition Duration shingles (98.4 sq ft per 3-bundle square); it is an example input only.

**Default example arithmetic**

```text
Plan area    = (40 + 2 × 1) × (30 + 2 × 1) = 42 × 32 = 1,344 ft²
Slope factor = √(1 + (6 ÷ 12)²) = 1.118
Roof area    = 1,344 × 1.118 = 1,502.64 ft²
Squares      = 1,502.64 ÷ 100 = 15.026 squares
Allowance    = 1,502.64 × (1 + 10/100) = 1,652.9 ft² (16.529 squares)
Bundles      = 1,652.9 ÷ 32.8 ft²/bundle = 50.393 → 51 bundles
```

The bundle count divides by the coverage printed on the wrapper rather than assuming 3 bundles per square, because coverage per bundle differs between products.

![Gable end of a house roof drawn at a 6/12 pitch](https://www.howmanyyardsdoineed.com/images/roofing-calculator/roof-gable-pitch-diagram.png)

The default example's gable end drawn at its pitch.

## Roofing squares for common house sizes

Roofing squares for common rectangular footprints with 1 ft of overhang on every side, computed with the same formula as the calculator. There is **no waste allowance** in these figures.

**Roofing squares by footprint and pitch**

| Footprint | 4/12 pitch | 6/12 pitch | 8/12 pitch | 12/12 pitch |
| --- | --- | --- | --- | --- |
| 36 × 24 ft | 10.41 | 11.05 | 11.87 | 13.97 |
| 40 × 30 ft | 14.17 | 15.03 | 16.15 | 19.01 |
| 50 × 40 ft | 23.02 | 24.42 | 26.25 | 30.89 |
| 60 × 40 ft | 27.45 | 29.11 | 31.3 | 36.83 |
| 60 × 50 ft | 33.98 | 36.05 | 38.75 | 45.59 |

Slope factors used: 4/12 = 1.054, 6/12 = 1.118, 8/12 = 1.202, 12/12 = 1.414. Find your pitch with the [roof pitch calculator](https://www.howmanyyardsdoineed.com/roof-pitch-calculator/).

## Quick answers: how many bundles and squares for common roofs

Each answer is computed with the same formula as the calculator, using its default settings unless the question says otherwise.

### How many bundles of shingles for 1,000 sq ft of roof?

A roof of 1,000 sq ft is 10 squares, or 11 with a 10% allowance, so at 32.8 sq ft per bundle (Owens Corning TruDefinition Duration) you need 34 bundles.

### How many roofing squares are in 2,500 square feet of roof?

A roof of 2,500 sq ft is 25 squares, or 27.5 with a 10% allowance, so at 32.8 sq ft per bundle (Owens Corning TruDefinition Duration) you need 84 bundles.

### How many bundles of IKO Cambridge shingles for 3,000 sq ft?

A roof of 3,000 sq ft is 30 squares, or 33 with a 10% allowance, so at 33.3 sq ft per bundle (IKO Cambridge) you need 100 bundles.

### How many bundles of shingles for a 24x36 house with a 4/12 pitch?

A 24 × 36 ft house with 1 ft overhangs and a 4/12 pitch has about 1,041 sq ft of roof (10.41 squares), or 11.46 squares with a 10% allowance: buy 35 bundles at 32.8 sq ft per bundle.

### How many squares is a 28x40 house roof with a 5/12 pitch?

A 28 × 40 ft house with 1 ft overhangs and a 5/12 pitch has about 1,365 sq ft of roof (13.65 squares), or 15.02 squares with a 10% allowance: buy 46 bundles at 32.8 sq ft per bundle.

### How many squares of shingles for a 32x48 house with an 8/12 roof?

A 32 × 48 ft house with 1 ft overhangs and an 8/12 pitch has about 2,043 sq ft of roof (20.43 squares), or 22.47 squares with a 10% allowance: buy 69 bundles at 32.8 sq ft per bundle.

### How many bundles of shingles for a 28x56 house with a 10/12 roof pitch?

A 28 × 56 ft house with 1 ft overhangs and a 10/12 pitch has about 2,265 sq ft of roof (22.65 squares), or 24.91 squares with a 10% allowance: buy 76 bundles at 32.8 sq ft per bundle.

### How many bundles of shingles for a 20x24 garage with a 6/12 roof?

A 20 × 24 ft garage with 1 ft overhangs and a 6/12 pitch has about 640 sq ft of roof (6.4 squares), or 7.03 squares with a 10% allowance: buy 22 bundles at 32.8 sq ft per bundle.

## How many bundles of shingles to buy

For the default roof, buy 51 bundles at 32.8 sq ft per bundle: 16.53 squares including the 10% allowance.

- **Field shingles only:** the count covers the roof surface. Ridge cap, hip cap, and starter strip are separate products with their own coverage, so measure ridges, hips, and eaves in linear feet and check those products' labels.
- **Underlayment:** enter the coverage each roll gives after laps to count rolls. The label shows the whole sheet; the side and end laps in the product's installation instructions use part of it. See [roof underlayment basics](https://www.howmanyyardsdoineed.com/guides/roof-underlayment-basics/) for the arithmetic.
- **Complex roofs:** dormers, multiple pitches, and intersecting roofs need each plane measured separately. Add the plane areas and use _Roof area_ mode. Raise the allowance for many valleys and hips.
- **Specifications:** this is a quantity estimate. Minimum slopes, underlayment type, ventilation, and fastening come from the shingle manufacturer's instructions and local code.

## Shingle calculator: coverage per bundle by product

IKO notes that the key figure is the area covered per bundle, and that not every shingle is packaged three bundles to a square. These published figures show why the calculator asks for coverage instead of assuming it:

**Published shingle coverage per bundle**

| Product | Coverage per bundle | Bundles per 100 sq ft | Manufacturer packaging |
| --- | --- | --- | --- |
| Owens Corning TruDefinition Duration | 32.8 sq ft | 3.05 | 3 bundles cover 98.4 sq ft |
| IKO Cambridge | 33.3 sq ft | 3 | 3 bundles per square |
| IKO Armourshake | 20 sq ft | 5 | 5 bundles per square |

Bundles per 100 sq ft = 100 ÷ coverage per bundle, before rounding up and before allowance. Use the figure on your own wrapper.

The shingle type matters too: a 3-tab bundle and a laminated bundle from the same maker can cover different areas. [Architectural vs 3-tab shingles](https://www.howmanyyardsdoineed.com/guides/architectural-vs-3-tab-shingles/) compares size, weight, and wind warranty product by product.

### Roofing squares calculator

Squares are roof area ÷ 100. The result panel shows squares before and after your allowance so you can compare with a contractor's quote, which is usually priced per square.

## Tips for measuring a roof

- Measure the footprint on the ground: it is safer than measuring on the roof, and the slope factor converts it to roof area.
- Include the overhang. On a small house, a 1 ft overhang on every side adds noticeable area.
- Measure each roof section separately when wings of the house have different pitches, then add the areas.
- Count bundles from the wrapper of the exact product and color you are buying, and keep a spare for repairs.
- Work on a roof only with proper fall protection. Hire a professional if you are not equipped to do it safely.

## Roofing calculator FAQ

### How do I calculate how many squares my roof is?

A roofing square is 100 square feet of roof area. Multiply the footprint including overhangs by the slope factor for your pitch to get the roof area, then divide by 100. For a 6/12 pitch the slope factor is about 1.118.

### How many squares is a 30 x 40 house roof?

With 1 ft of overhang on every side and a 6/12 pitch, the footprint is 42 × 32 ft and the roof is about 1,503 sq ft, or 15.03 squares before any waste allowance. A steeper or shallower pitch changes the answer.

### How many bundles of shingles are in a square?

It depends on the product. IKO says most popular shingles are packaged so three bundles cover a square, but some need more: its Armourshake covers 20 sq ft per bundle, or five bundles per square. Owens Corning lists 98.4 sq ft per 3-bundle square for TruDefinition Duration. Check the coverage on your wrapper.

### How many bundles of shingles do I need?

Divide the roof area plus your waste allowance by the coverage per bundle on the wrapper and round up. For the default 40 × 30 ft house at 6/12 with a 10% allowance and 32.8 sq ft per bundle, that is 51 bundles.

### Does roof pitch change how many shingles I need?

Yes. A steeper roof has more surface over the same footprint. The slope factor is 1.054 at 4/12, 1.118 at 6/12, 1.202 at 8/12, and 1.414 at 12/12.

### How much extra shingle should I buy for waste?

There is no single figure. Simple gable roofs need less than roofs with many hips, valleys, and dormers, where more shingles are cut. The calculator uses a 10% allowance as an adjustable example; raise it for complicated roofs.

### Does this include ridge cap, starter strip, or underlayment?

Ridge cap and starter strip are not included; they are separate products measured in linear feet. Underlayment rolls are counted only if you enter the roll coverage, net of the side and end laps the product requires.

### Can I use this for a hip roof?

Yes, if every roof plane has the same pitch: the sloped area of equal-pitch planes equals the plan area times the slope factor. For roofs with several pitches, measure each plane and use Roof area mode.

### Can I use metric measurements?

Yes. Switch to meters and enter coverage per bundle in square meters. Results show square meters alongside roofing squares, which are always 100 square feet.

## Related calculators and guides

### Calculators

- [Roof Pitch Calculator](https://www.howmanyyardsdoineed.com/roof-pitch-calculator/) — Pitch as x/12, roof angle in degrees, slope percentage, and the sloped length for a given horizontal run.
- [Drywall Calculator](https://www.howmanyyardsdoineed.com/drywall-calculator/) — Drywall sheet count for walls and ceilings from room dimensions or total area, minus openings, by sheet size.
- [Paint Calculator](https://www.howmanyyardsdoineed.com/paint-calculator/) — Gallons or liters of paint for your walls and number of coats, using the coverage printed on your paint's label.

### Guides

- [Roof Underlayment Basics: Synthetic, Felt, and Ice Barrier](https://www.howmanyyardsdoineed.com/guides/roof-underlayment-basics/) — Underlayment and ice barrier explained, with laps, low-slope rules, and a worked roll count for a gable roof.
- [Architectural vs 3-Tab Shingles](https://www.howmanyyardsdoineed.com/guides/architectural-vs-3-tab-shingles/) — 3-tab shingles are one flat layer; architectural shingles are two or more layers bonded together. Compared product by product from CertainTeed and IKO data: size, exposure, coverage per bundle, weight, and wind warranty.
- [How to Measure Roof Pitch](https://www.howmanyyardsdoineed.com/guides/how-to-measure-roof-pitch/) — Measure rise over 12 in of run from the attic or roof, read an angle, or work it out from plans, then convert.
- [How to Measure an Irregular Area](https://www.howmanyyardsdoineed.com/guides/measuring-irregular-areas/) — Split odd shapes into rectangles, triangles, circles, and trapezoids, then average width and depth.

### Buying guides

- [Best Roofing Nailers for DIY Reroofs (2026)](https://www.howmanyyardsdoineed.com/best/roofing-nailers/) — Six coil roofing nailers ranked on published specs for a DIY asphalt-shingle reroof, with the nails, magazine loads and battery charges worked out from the roofing calculator.

## Sources

- [How Many Square Feet in a Bundle of Shingles (IKO)](https://www.iko.com/na/blog/how-many-shingles-in-a-bundle/) — IKO Industries. Used for: 1 square = 100 sq ft; Cambridge 33.3 sq ft/bundle (3 per square); Armourshake 20 sq ft/bundle (5 per square). Checked 2026-10-04.
- [TruDefinition Duration Shingles product page (Owens Corning)](https://www.owenscorning.com/en-us/roofing/shingles/trudefinition-duration) — Owens Corning. Used for: 3 bundles per square; 98.4 sq ft coverage per square (32.8 sq ft per bundle). Checked 2026-10-04.
- [NIST Guide to the SI, Appendix B.9: Factors for units listed by kind of quantity](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9) — National Institute of Standards and Technology. Used for: 1 ft = 0.3048 m (exact); 1 in = 2.54 cm (exact). Checked 2026-10-03.

**Estimate only.** Results are planning estimates computed from the numbers you enter. They are not engineering, structural, or code advice. Confirm quantities, product yields, and installation requirements with your supplier, the product label, and your local building authority before you order or build.
