# Concrete Calculator

Free online concrete calculator for slabs, patios, and pads. Enter length, width, and thickness to get cubic yards, a ready-mix order, and bag counts.

Calculator page: <https://www.howmanyyardsdoineed.com/concrete-calculator/> (updated 2026-10-06). This Markdown version shows the default example; enter your own dimensions on the page.

**Answer:** For a 10 ft × 10 ft slab 4 in thick, you need about 1.36 cubic yards of concrete (1.23 plus 10% extra): order 1.5 cubic yards of ready-mix (sold in ¼ cubic yard steps), or buy 62 bags of 80 lb QUIKRETE Concrete Mix (No. 1101).

## How to use this concrete calculator

1. Enter the slab's **length** and **width**. Measure inside the forms, not the outside of the boards. Meters and centimeters are under **More options**.
2. Enter the **thickness**. Measure the actual form height: nominal lumber is smaller than its name (the softwood lumber standard lists a nominal 6 in width at 5-1/2 in dressed).
3. Under **More options**, set the extra for spills and uneven ground, the **waste allowance**. The default 10% is an adjustable planning figure, not a standard. Use more if the subgrade is uneven or the measurements are rough.
4. There too, pick the **truck order size** your ready-mix supplier sells in, and the **bag brand and size** you plan to buy. The bag count uses that product's published yield.
5. For an L-shaped or irregular slab, split it into rectangles, run each one, and add the results. See [measuring irregular areas](https://www.howmanyyardsdoineed.com/guides/measuring-irregular-areas/).

## How to calculate concrete: the formula, shown

Concrete is ordered by volume. A rectangular slab is length × width × thickness, with every dimension converted to the same unit first. One cubic yard is 3 ft × 3 ft × 3 ft = 27 cubic feet, and one foot is exactly 0.3048 m, so one cubic yard is 0.764555 m³.

**Default example.** A 10 ft × 10 ft slab, 4 in thick, with a 10% allowance.

**Default example arithmetic**

```text
Area        = 10 ft × 10 ft = 100 ft²
Thickness   = 4 in ÷ 12 in/ft = 0.3333 ft
Volume      = 100 ft² × 0.3333 ft = 33.3333 ft³
Cubic yards = 33.3333 ft³ ÷ 27 = 1.2346 yd³
Allowance   = 1.2346 yd³ × (1 + 10/100) = 1.358 yd³ (36.6667 ft³)
Metric      = 36.6667 ft³ × 0.3048³ = 1.0383 m³
Ready-mix   = 1.358 ÷ 0.25 = 5.432 → 6 steps = 1.5 yd³
Bags        = 36.6667 ft³ ÷ 0.6 ft³/bag = 61.11 → 62 bags (80 lb)
```

Two numbers are kept separate on purpose: the **requirement** (1.36 yd³) carries full precision, and the **purchase quantity** rounds that requirement up to whole supplier steps or whole bags. Rounding happens only once, at the end, and only upward.

![Isometric diagram of a 10 ft by 10 ft concrete slab, 4 in thick, with its length, width and thickness labeled](https://www.howmanyyardsdoineed.com/images/concrete-calculator/concrete-slab-volume-diagram.png)

The default example slab drawn to its proportions, with the thickness exaggerated so it stays visible.

## How much concrete for common slab sizes

Cubic yards of concrete for common square slabs at 4 in and 6 in thick, computed with the same formula as the calculator. Figures have **no waste allowance**, so add yours before ordering. Bag counts use the 0.60 ft³ yield published for 80 lb QUIKRETE Concrete Mix (No. 1101), rounded up to whole bags.

**Concrete for common slab sizes**

| Slab size | 4 in: cubic yards | 4 in: 80 lb bags | 6 in: cubic yards | 6 in: 80 lb bags |
| --- | --- | --- | --- | --- |
| 4 × 4 ft | 0.2 | 9 | 0.3 | 14 |
| 10 × 10 ft | 1.23 | 56 | 1.85 | 84 |
| 12 × 12 ft | 1.78 | 80 | 2.67 | 120 |
| 16 × 16 ft | 3.16 | 143 | 4.74 | 214 |
| 20 × 20 ft | 4.94 | 223 | 7.41 | 334 |
| 24 × 24 ft | 7.11 | 320 | 10.7 | 480 |
| 30 × 30 ft | 11.1 | 500 | 16.7 | 750 |

## Quick answers: how much concrete for common slabs

Each answer is computed with the same formula as the calculator, using its default settings unless the question says otherwise.

### How many 80 lb bags of concrete for a 12x20 slab 4 inches thick?

You need 147 bags of 80 lb QUIKRETE Concrete Mix (No. 1101) for a 12 × 20 ft slab 4 in thick: 80 cubic feet of concrete, or 88 ft³ with a 10% allowance, at 0.6 ft³ per bag.

### How many 60 lb bags of concrete for a 6x8 slab 4 inches thick?

You need 40 bags of 60 lb QUIKRETE Concrete Mix (No. 1101) for a 6 × 8 ft slab 4 in thick: 16 cubic feet of concrete, or 17.6 ft³ with a 10% allowance, at 0.45 ft³ per bag.

### How many 40 lb bags of concrete for a 4x6 slab 4 inches thick?

You need 30 bags of 40 lb QUIKRETE Concrete Mix (No. 1101) for a 4 × 6 ft slab 4 in thick: 8 cubic feet of concrete, or 8.8 ft³ with a 10% allowance, at 0.3 ft³ per bag.

### How many 80 lb bags of QUIKRETE for a 10x16 slab 4 inches thick?

You need 98 bags of 80 lb QUIKRETE Concrete Mix (No. 1101) for a 10 × 16 ft slab 4 in thick: 53.3 cubic feet of concrete, or 58.7 ft³ with a 10% allowance, at 0.6 ft³ per bag.

### How many 80 lb bags of Sakrete for a 10x12 slab 4 inches thick?

You need 74 bags of 80 lb Sakrete High-Strength Concrete Mix for a 10 × 12 ft slab 4 in thick: 40 cubic feet of concrete, or 44 ft³ with a 10% allowance, at 0.6 ft³ per bag.

### How much concrete for a 12x24 slab 4 inches thick?

A 12 × 24 ft slab 4 in thick needs 3.56 cubic yards of concrete, or 3.91 yd³ with a 10% allowance, so order 4 yd³ of ready-mix in ¼ cubic yard steps.

### How many yards of concrete for a 20x30 slab 5 inches thick?

A 20 × 30 ft slab 5 in thick needs 9.26 cubic yards of concrete, or 10.2 yd³ with a 10% allowance, so order 10.25 yd³ of ready-mix in ¼ cubic yard steps.

### How many cubic yards of concrete for a 24x36 slab 6 inches thick?

A 24 × 36 ft slab 6 in thick needs 16 cubic yards of concrete, or 17.6 yd³ with a 10% allowance, so order 17.75 yd³ of ready-mix in ¼ cubic yard steps.

### How much concrete for a 3x4 m slab 10 cm thick?

A 3 × 4 m slab 10 cm thick needs 1.2 cubic meters of concrete, or 1.32 m³ with a 10% allowance, so order 1.4 m³ in 0.1 cubic meter steps.

## How much concrete to order: ready-mix or bags

For the default 10 × 10 ft slab, the requirement is 1.36 cubic yards. In ¼ cubic yard steps that becomes a ready-mix order of 1.5 yd³. In bags, it is 62 bags of 80 lb QUIKRETE Concrete Mix (No. 1101).

- **Ready-mix truck:** give the supplier the rounded-up volume and ask about minimum loads, short-load charges, and how long the truck can wait. These vary by supplier.
- **Bagged mix:** buy the whole-bag count for the exact product on your receipt. Yields differ between products and bag sizes. A 90 lb bag is listed at 0.675 ft³ by QUIKRETE and 0.66 ft³ by Sakrete. See [concrete bag yields](https://www.howmanyyardsdoineed.com/guides/concrete-bag-yields/).
- **Choosing between them:** the [bagged vs bulk guide](https://www.howmanyyardsdoineed.com/guides/bagged-vs-bulk-materials/) walks through the trade-offs, including labor and mixing time.
- **Mixing bags yourself:** a mixer takes fewer bags per batch than its drum size suggests. The [best concrete mixers](https://www.howmanyyardsdoineed.com/best/concrete-mixers/) guide counts 80 lb bags per batch, and batches for this slab, for each mixer it ranks.

## Concrete bag calculator: QUIKRETE and Sakrete yields

A bag count depends on the yield the manufacturer publishes for that product, not on its weight alone. These are the yields used above:

**Published concrete bag yields**

| Product | Bag | Yield per bag | Bags per cubic yard |
| --- | --- | --- | --- |
| QUIKRETE Concrete Mix (No. 1101) | 80 lb | 0.6 ft³ | 45 |
| QUIKRETE Concrete Mix (No. 1101) | 60 lb | 0.45 ft³ | 60 |
| QUIKRETE 5000 Concrete Mix (No. 1007) | 80 lb | 0.6 ft³ | 45 |
| QUIKRETE 5000 Concrete Mix (No. 1007) | 60 lb | 0.45 ft³ | 60 |
| Sakrete High-Strength Concrete Mix | 80 lb | 0.6 ft³ | 45 |
| Sakrete High-Strength Concrete Mix | 60 lb | 0.45 ft³ | 60 |

Bags per cubic yard = 27 ft³ ÷ yield, before rounding up and before allowance. More products and bag sizes are in [concrete bag yields](https://www.howmanyyardsdoineed.com/guides/concrete-bag-yields/).

### QUIKRETE calculator

Choose a QUIKRETE product in the _Bagged product_ menu to count bags with its published yield: Concrete Mix (No. 1101), 5000 Concrete Mix (No. 1007), or Fast-Setting Concrete Mix (No. 1004).

### Concrete yard calculator: ordering by the cubic yard

Ready-mix is sold by volume. The result panel rounds your requirement up to the increment you choose, from ¼ cubic yard to 1 cubic meter, so you can give the supplier a number they can load.

## Tips for measuring a concrete slab

- Measure thickness in several places. A slab planned at 4 in that averages 4.5 in needs 12.5% more concrete.
- Run the numbers in your supplier's unit. If they quote cubic meters, set the increment to a cubic-meter step.
- A gravel base under the slab is a separate material. Size it with the [gravel calculator](https://www.howmanyyardsdoineed.com/gravel-calculator/).
- Count bags against the yield printed on the bag you actually buy. Bags sold in other regions may be different sizes.
- This calculator measures volume only. Thickness, reinforcement, and base requirements come from your plans or local building authority. For mesh and rebar terms and placement, see [rebar vs wire mesh for a concrete slab](https://www.howmanyyardsdoineed.com/guides/rebar-vs-wire-mesh-for-concrete/).

## Concrete calculator FAQ

### How much concrete do I need for a 10x10 slab 4 inches thick?

A 10 ft × 10 ft slab 4 in thick is 33.3 cubic feet, or 1.23 cubic yards, before any allowance. With a 10% allowance it is 1.36 cubic yards. That rounds up to 1.5 yd³ of ready-mix in quarter-yard steps, or 62 80 lb bags of QUIKRETE Concrete Mix.

### How many bags of concrete are in a cubic yard?

It depends on the product's published yield. QUIKRETE lists its Concrete Mix (No. 1101) at 0.6 ft³ per 80 lb bag, 0.45 ft³ per 60 lb bag, and 0.3 ft³ per 40 lb bag. A cubic yard is 27 ft³, so that works out to 45, 60, and 90 bags per cubic yard before any allowance.

### How do I convert cubic feet of concrete to cubic yards?

Divide cubic feet by 27. A cubic yard is 3 ft × 3 ft × 3 ft, which is 27 cubic feet. For example, 54 cubic feet is 2 cubic yards.

### Do all concrete bags of the same weight yield the same volume?

No. The 80 lb QUIKRETE and Sakrete mixes listed here are each published at 0.60 ft³, but other sizes and products differ. QUIKRETE lists its 90 lb Concrete Mix at 0.675 ft³, while Sakrete lists its 90 lb High-Strength Concrete Mix at 0.66 ft³. QUIKRETE Fast-Setting Concrete Mix is 0.375 ft³ per 50 lb bag. Use the yield printed on the bag you buy.

### How much extra concrete should I order?

No single figure fits every job. This calculator defaults to a 10% allowance as an adjustable example. Raise it if the subgrade is uneven, the forms are long, or your measurements are rough. Lower it for small, well-formed pours you have measured carefully. The allowance is applied before rounding up to bags or supplier steps.

### Why does the ready-mix order differ from the cubic yards I need?

Suppliers sell in fixed increments. The calculator rounds your requirement up to whole steps of the increment you choose. Rounding is never down, so a 1.36 yd³ requirement becomes 1.5 yd³ in quarter-yard steps.

### Can I enter metric measurements?

Yes. Switch length and width to meters and thickness to centimeters. The result is always shown in cubic feet, cubic yards, and cubic meters. You can also choose a cubic-meter order increment if your supplier sells by the cubic meter.

### How do I calculate concrete for a round or L-shaped slab?

Split an L-shaped slab into rectangles, calculate each one, and add the volumes. For a circle, area is π × radius², and volume is that area times thickness. The guide to measuring irregular areas shows how to break shapes down.

### Does the result include a gravel base, rebar, or footings?

No. The calculator estimates the volume of a flat rectangular slab of uniform thickness. Base material, thickened edges, footings, and reinforcement depend on your design and local requirements. Calculate them separately.

## Related calculators and guides

### Calculators

- [Gravel Calculator](https://www.howmanyyardsdoineed.com/gravel-calculator/) — Gravel, crushed rock, or landscape rock volume in cubic yards and meters, with an optional weight from your supplier's density.
- [Topsoil Calculator](https://www.howmanyyardsdoineed.com/topsoil-calculator/) — Topsoil volume in cubic yards and meters for lawns, beds, and fill, with an optional weight from your supplier's density.
- [Deck Calculator](https://www.howmanyyardsdoineed.com/deck-calculator/) — Decking board count from deck size, actual board width, gap, and board length, with the cutting assumptions shown.
- [Paver Calculator](https://www.howmanyyardsdoineed.com/paver-calculator/) — Pavers and pallets for a patio or walkway from area and paver size, with optional base gravel and bedding sand volumes.

### Guides

- [How to Pour a Concrete Slab](https://www.howmanyyardsdoineed.com/guides/how-to-pour-a-concrete-slab/) — Plan, form, mix, place, finish, joint, and cure a slab, following the manufacturer's published method.
- [How Much Concrete Do I Need for a Fence Post?](https://www.howmanyyardsdoineed.com/guides/how-much-concrete-for-fence-posts/) — Hole size, concrete volume, and bags per post from the manufacturers' instructions, with a bags-per-hole table for 4×4 and 6×6 posts.
- [Pouring and Curing Concrete in Cold or Hot Weather](https://www.howmanyyardsdoineed.com/guides/concrete-in-cold-and-hot-weather/) — Temperature limits, freeze protection, hot-weather drying, and curing time for a new slab, with a worked example.
- [Concrete Bag Yields by Bag Size](https://www.howmanyyardsdoineed.com/guides/concrete-bag-yields/) — Published cubic-foot yields for bagged concrete mixes, with bags per cubic foot, cubic yard, and cubic meter.
- [What Is a Cubic Yard?](https://www.howmanyyardsdoineed.com/guides/cubic-yards-explained/) — What a cubic yard is, how to convert area × depth into yards, and how much ground one yard covers.
- [Bagged vs. Bulk Materials: Which Should You Buy?](https://www.howmanyyardsdoineed.com/guides/bagged-vs-bulk-materials/) — How to compare bags and bulk delivery using bags per cubic yard and your own local prices.
- [How to Plan a Bulk Material Delivery](https://www.howmanyyardsdoineed.com/guides/planning-material-delivery/) — Rounding to supplier increments, questions to ask, and a checklist before bulk material arrives.
- [Rebar vs Wire Mesh for a Concrete Slab](https://www.howmanyyardsdoineed.com/guides/rebar-vs-wire-mesh-for-concrete/) — Mesh and rebar compared for slabs on ground: what each does, how each is named, where it goes, and a worked steel count.

### Buying guides

- [Best Concrete Mixers for DIY Slabs and Posts (2026)](https://www.howmanyyardsdoineed.com/best/concrete-mixers/) — Six drum and paddle mixers ranked on published specs for bagged concrete, with bags per batch and batches per slab or post worked out from the calculators.
- [Best Laser Measures for Home Projects (2026)](https://www.howmanyyardsdoineed.com/best/laser-measures/) — Six laser measures ranked on published specs for measuring rooms, slabs and roofs, with one room run through the floor, paint and drywall calculators.
- [Best Wheelbarrows for Concrete, Gravel and Mulch (2026)](https://www.howmanyyardsdoineed.com/best/wheelbarrows-for-concrete-and-gravel/) — Seven wheelbarrows and carts ranked on published specs for moving concrete, gravel and mulch, with the loads per job worked out from the calculators.
- [DEWALT vs Milwaukee Drill/Driver Kits Compared (2026)](https://www.howmanyyardsdoineed.com/best/dewalt-vs-milwaukee-drill-driver-kits/) — Seven 20V MAX and M18 drill/driver kits side by side on their makers' published specs, ranked for deck, drywall and fence work, with screw counts per job.

## Sources

- [QUIKRETE Concrete Mix (No. 1101) product data sheet](https://www.quikrete.com/pdfs/data_sheet-concrete%20mix%201101.pdf) — QUIKRETE Companies. Used for: 40 lb = 0.30 ft³; 60 lb = 0.45 ft³; 80 lb = 0.60 ft³; 90 lb = 0.675 ft³ (regional). Checked 2026-10-03.
- [QUIKRETE 5000 Concrete Mix (No. 1007) product data sheet](https://www.quikrete.com/pdfs/data_sheet-quikrete%205000%201007.pdf) — QUIKRETE Companies. Used for: 60 lb = 0.45 ft³; 80 lb = 0.60 ft³. Checked 2026-10-03.
- [QUIKRETE Fast-Setting Concrete Mix (No. 1004) product data sheet](https://www.quikrete.com/pdfs/data_sheet-fast%20setting%20concrete%20mix%201004-50.pdf) — QUIKRETE Companies. Used for: 50 lb = 0.375 ft³. Checked 2026-10-03.
- [Sakrete High-Strength Concrete Mix technical data sheet](https://www.sakrete.com/wp-content/uploads/2024/01/Sakrete-High-Strength-Concrete-Mix-TDS.pdf) — Sakrete. Used for: 40 lb = 0.30 ft³; 60 lb = 0.45 ft³; 80 lb = 0.6 ft³; 90 lb = 0.66 ft³. Checked 2026-10-03.
- [NIST Guide to the SI, Appendix B.9: Factors for units listed by kind of quantity](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9) — National Institute of Standards and Technology. Used for: 1 ft = 0.3048 m (exact); 1 in = 2.54 cm (exact). Checked 2026-10-03.
- [NIST Handbook 44 (2026), Appendix C: General Tables of Units of Measurement](https://www.nist.gov/system/files/documents/2025/12/30/appc-26-HB44-20251222.pdf) — National Institute of Standards and Technology. Used for: 1 yd³ = 27 ft³; 1 US gal = 231 in³. Checked 2026-10-03.

**Estimate only.** Results are planning estimates computed from the numbers you enter. They are not engineering, structural, or code advice. Confirm quantities, product yields, and installation requirements with your supplier, the product label, and your local building authority before you order or build.
